Nano ET Diagnostic Interface

Diagnostic interface for private and professional use.

Buy Download Software › Documentation ›

Nano ET

This is a compact diagnostic interface designed for modern vehicles equipped with an OBD-II connector. It supports the modern DoIP protocol, CAN 2.0, and the K-Line.

Supported Vehicles

VAG 2004 and newer;
BMW/MINI F-series and newer;
MERCEDES 2010 and newer;
CHINESE CARS 2010 and newer. Excluding Jetour T2 and other models with CAN FD;
MITSUBISHI 2010 and newer;
TOYOTA 2010 and newer;
SUZUKI 2005 and newer;
HYUNDAI
- AVANTE (CN7, CN7 HEV, CN7 N)
- CRETA (SU2I, SU2I ALCAZAR PS7I, SU2R)
- ELANTRA (CN7, CN7A, CN7 HEV), EQ900 (HI)
- G80 (RG3, RG3 EV), GRAND I10 NIOS / AURA (AI3), GRANDEUR HYBRID (IG HEV), GV70 (JK1), GV80 (JX1)
- HB20 (BR2)
- I10 (AC3), I20 (BC3, BI3, BC3 BAYON, BC3N), IONIQ 5 (NE EV), IONIQ ELECTRIC (AE EV)
- KONA ELECTRIC (OS EV), KONA N (OSN)
- NEXO (FE)
- PORTER 2 ELECTRIC (HR EV)
- SANTA CRUZ (NX4A OB), SANTAFE (TMA, TM HEV, TM PHEV), SONATA (DN8, DN8A, DN8 HEV, LF HEV), STARIA (US4)
- TUCSON (NX4, NX4A, NX4E, NX4 HEV, NX4E HEV, NX4 PHEV, NX4E PHEV)
- VELOSTER N (JSN), VENUE (QX, QXI)
KIA
- BONGO3 EV (PU EV)
- CARNIVAL (KA4), CEED (CD, CD PROCEED, CD SPORTSWAGON, CD PHEV), CERATO / FORTE (BDm)
- EV6 (CV)
- FORTE (BD, BDM)
- K5 (DL3, DL3A, DL3 HEV), K8 (GL3, GL3 HEV)
- NIRO (DE EV)
- SELTOS (SP2, SP2I), SONET (QY), SORENTO (MQ4, MQ4A, MQ4 HEV, MQ4 PHEV), SOUL EV (SK3 EV), SPORTAGE (NQ5, NQ5 HEV), STONIC (QE)
- TELLURIDE (ON)
- XCEED (CD CUV, CD CUV PHEV)
LADA excluding LARGUS;
SSANGYONG
- Tivoli / XLV (X100)
- Tivoli New (X150)
- Korando II (C300)
- Torres (J100)

Models to which Nano ET MUST NOT be connected

RENAULT, TOYOTA (before 2010), FORD, OPEL, CHEVROLET, FIAT, ISUZU;

Warning! It is strictly forbidden to connect the Nano ET to vehicles where the CAN bus is located on pins
12-13 and 3-11 of the OBD-II connector. These pins are used for Ethernet, which will cause a short circuit of the CAN bus. This will not damage the vehicle's electronics, but it can lead to unpleasant consequences, such as logging numerous error codes or key desynchronization.

Always Connected

Some people keep a scanner in the glove compartment just in case. But if a family member is driving and you're not around, not everyone can find the OBD port, connect the Nano ET, and figure out the software. With Nano ET, it's simpler: Nano ET is already in place, just open the app and press one button.

Remote Assistance — a loved one sends you an error report via email or messenger, and you immediately understand if the problem is serious or if it's safe to continue driving.
Peace of Mind for Your Family — install Nano ET in your parents', spouse's, or children's car. If the "check engine" light comes on, they can send the information to you or your mechanic with one button.
Save Time at the Workshop — the mechanic receives error information in advance and can prepare for the repair before the car even arrives.

Discreet and Intelligent

Nano ET can be left in the car permanently. No need to plug and unplug it every time. The interface is always in place and ready to work when needed.

Intelligent Sleep Mode — Nano ET automatically detects when the vehicle is not in use and enters a deep sleep with minimal power consumption. When the car starts, it instantly wakes up and is ready to work.
Protection from Strangers — Nano ET only works with devices that you have personally added to the trusted list. A passerby or neighbor cannot connect to your car.
Adjustable Communication Range — The Bluetooth signal strength can be reduced so that Nano ET is only accessible inside the cabin. This makes external connection significantly more difficult.

ScanDoc Software

If you work with one or more of the makes from the supported list, the Nano ET becomes an affordable alternative to its older models, without compromising on functionality.

Full-featured diagnostics for the listed makes — fully identical to the capabilities of the ScanDoc Compact.
Reading and clearing errors, adaptations, coding, service functions.
By purchasing the Nano ET, you receive the ScanDoc software with all available makes supported by this diagnostic interface.

More about ScanDoc software ›

Wireless ENET Adapter

The Nano ET functions as a WiFi-Ethernet gateway for vehicles with ENET diagnostics. Connect wirelessly where an ENET cable is typically needed.

Compatible with popular software: E-sys, ISTA+, BimmerCode, BimmerLink, DeepOBD, and others.
Supports BMW F/G/I-series and MINI F-series vehicles.

The software is not included in the scope of delivery. Using third-party software requires licenses from the respective developers.

Dealer Software and DoIP

Thanks to support for the J2534 standard, the Nano ET is compatible with dealer and professional diagnostic software.

Works with ODIS, Xentry, ISTA+, and other J2534-compatible software.
DoIP (Diagnostics over IP) support — significantly faster ECU diagnostics and flashing compared to CAN.
Ideal for modern VAG, BMW, Mercedes with Ethernet diagnostics.
The Nano ET driver emulates ignition on/off for ODIS and Xentry.

If you are looking for an affordable, high-quality diagnostic interface for your applications, then pay attention to the Nano ET.

ScanDoc Nano is currently the first and only one on the market that works with Android via the J2534 interface. We provide libraries and application examples for mobile development free of charge.
We have extended the ELM327 protocol specification and added a DoIP interface to it.
The Nano ET is certified according to the ECE standard, allowing its use while driving in Europe. It is also certified for use in Japan and America.
We will be happy to assist you in integrating our diagnostic interface into your software.

Diagnostic Interfaces: KL-Line (7,15), CAN (6,14), Ethernet DoIP (3,11, 12,13);
Diagnostic Protocols: KW71, KW82, KW1284, DS2, ISO8, ISO14230, ISO9141, ISO15765, J1979, J1850, TP2.0;
Communication Protocols: J2534-1/2 ;
Connectivity:
- WI-FI: IEEE 802.11b 100mW, 11 or 14 (Japan) channels, 150 Mbit/s (theoretical), range in open area from 10 to 50 m;
- BLE: 4.2, Low Energy;
- USB: Type C 12 Mbit/s.
Power: 9-30V DC.

Nano ET Diagnostic Interface

66,39 ₽

€66.39

€66.39

Nano ET

Supported Vehicles

Models to which Nano ET MUST NOT be connected

For Private Users

Always Connected

Discreet and Intelligent

For Professionals and Workshops

ScanDoc Software

Wireless ENET Adapter

Dealer Software and DoIP

For Developers

Technical Specifications